Tel.
Menu
Altronics - RLS OPTICAL LASER SENSOR
Altronics - CAPTEUR LASER OPTIQUE RLS
Datasheet
Back to previous page

RLS OPTICAL LASER SENSOR


Speed sensors | Sensors

Part Number : RLS


Quotation or Information request

The RLS series optical laser sensors in 317L stainless steel IP67 have an integrated target indicator, which confirms that the sensor detects the target.
The RLS is provided with a 3 meter cable and is available in several variants (RLS-W, RLS-P, RLS24-W, RLS24-P). They operate on a speed range between 1 and 250,000 RPM between -10 and 50°C.
The latter has a waterproof M12 connector, which make it easier to remove, especially for cleaning the latter. These are easy to install and to use.

Show full description RLS OPTICAL LASER SENSOR
Hide full description RLS OPTICAL LASER SENSOR

Main features

  • Speed range
    1 to 250,000 RPM
  • Illumination
    Visible Red Lase


    Laser specifications: Complies with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11.
    Maximum laser output: 1 mW
    Pulse duration: Continuous
    Laser wavelength: 650 nm
    Beam diameter: 4x7 mm typical at 2 meters
  • On-Target indicator
    Green LED (side mounted)
  • Operating Range
    Up to 25 ft. (7.6m)
    60° offset from target
  • Power requirement
    RLS-W and RLS-P: 4-15Vdc ±20%
    RLS24-W and RLS24-P: 10-24Vdc ±20%
  • Output signal
    Output signal standard: Open Collector with internal pull up resistor (5600 ohm) to supply voltage. Positive pulse when target present.
    On 24V unit output voltage: input voltage less 5V
  • Connection
    Waterproof M12 connector with 3m cable.
  • Operating temperature
    -10 to 50°C
  • Dimensions of the sensor
    20mm x 101.7mm
  • Material
    Stainless steel tube supplied with mounting bracket

RLS sensors are available in several versions

- RLS-W : Sensor with 3m cable with tinned leads, mounting bracket with T-5 tape (4-15 Vdc input power)
- RLS-P : Sensor with 3m cable, 1/8” phone plug, mounting bracket with T-5 tape (4-15 Vdc input power)
- RLS24-W : Sensor with 3m cable with tinned leads, mounting bracket with T-5 tape (10-24 Vdc input power)
- RLS24-P : Sensor with 3m cable with tinned leads with 24Vdc input supply (10-24 Vdc)

Certification

This optical laser sensor is IP67 certified.

Manufacturer

MONARCH INSTRUMENTS


Altronics - Monarch Instrument
Send to...
Quotation or Information request

Products within similar range


Altronics products

Need help ?

We'll call you at the date and hour of your choice to answer your question

Immediat call
Schedule a call