RLS OPTICAL LASER SENSOR

Main features

• Speed range
  1 to 250,000 RPM
• Illumination
  Visible Red Lase
  
  
  Laser specifications: Complies with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11.
  Maximum laser output: 1 mW
  Pulse duration: Continuous
  Laser wavelength: 650 nm
  Beam diameter: 4x7 mm typical at 2 meters
• On-Target indicator
  Green LED (side mounted)
• Operating Range
  Up to 25 ft. (7.6m)
  60° offset from target
• Power requirement
  RLS-W and RLS-P: 4-15Vdc ±20%
  RLS24-W and RLS24-P: 10-24Vdc ±20%
• Output signal
  Output signal standard: Open Collector with internal pull up resistor (5600 ohm) to supply voltage. Positive pulse when target present.
  On 24V unit output voltage: input voltage less 5V
• Connection
  Waterproof M12 connector with 3m cable.
• Operating temperature
  -10 to 50°C
• Dimensions of the sensor
  20mm x 101.7mm
• Material
  Stainless steel tube supplied with mounting bracket

RLS sensors are available in several versions

- RLS-W : Sensor with 3m cable with tinned leads, mounting bracket with T-5 tape (4-15 Vdc input power)
- RLS-P : Sensor with 3m cable, 1/8” phone plug, mounting bracket with T-5 tape (4-15 Vdc input power)
- RLS24-W : Sensor with 3m cable with tinned leads, mounting bracket with T-5 tape (10-24 Vdc input power)
- RLS24-P : Sensor with 3m cable with tinned leads with 24Vdc input supply (10-24 Vdc)

Certification

This optical laser sensor is IP67 certified.

Manufacturer

MONARCH INSTRUMENTS